diamond flap discs is an accessory of electric tools, which is mainly applicable to the polishing, polishing and polishing of metallurgy, machinery, light industry, wood products, furniture, hardware, plastics, melamine, building materials, automobile, tanning, textile and other industries.
diamond flap discs are used for polishing metal and wood, and cannot be mixed.
Three Skills to Improve the Performance of Louver
1、 The right choice
The correct selection of diamond flap discs can ensure the maximum utilization of diamond flap discs. The cutting force of high-quality diamond flap discs is relatively strong, which can adapt to the cutting treatment of materials with different strengths. Its heat-resistant and wear-resistant characteristics can also complete large-scale equipment grinding and polishing. Its hardness is strong, and its service life is several times that of similar cutting pieces.
2、 Sufficient pressure
Excessive use will overload and overheat the louver, which will cause the louver to wear faster and reduce the effectiveness of the abrasive. At the same time, if there is not enough pressure to use, the louver will not be bonded with the metal, which is not enough to effectively grind the surface, which will lead to longer grinding time and further wear.
3、 Proper use
The louver is designed to work at one angle. The angle depends on what you are making and what you are grinding, however, it is usually between 5-10 degrees flat/horizontal. If the angle is flat, too many blade particles will immediately connect with the metal, causing the louver to wear faster. If the angle is too high, the blade cannot be fully used. This will lead to excessive wear and insufficient grinding of some louvers.
Post time: Dec-08-2022