Marble polishing is the previous process of stone care crystal surface treatment or the last procedure of stone light plate processing. It is one of the most important technological processes of stone care today, which is different from the marble cleaning, waxing and polishing of the business scope of cleaning companies in the traditional sense.
The difference between marble grinding block polishing and waxing
The essential difference
1. Marble grinding block polishing is a prelude to stone crystal surface treatment or a necessary technological process in stone processing. The main principle is to use the pressed grinding blocks synthesized by inorganic acids, metal oxides and other substances to cooperate with the pressure of the diamond polishing pads, the high-speed grinding force, the frictional heat energy, and the action of water to carry out physical and chemical chemical reactions on the smooth marble surface. Thereby a new bright crystal layer is formed. This crystal layer has super bright and clear luminosity, the luminosity can reach 90-100 degrees. This crystal layer is a modified compound crystal layer of the stone surface layer (1-2mm thick).
2. Marble cleaning is a prelude to marble waxing and polishing. Marble cleaning, waxing and polishing was a popular marble cleaning and maintenance protection measure in the early 1980s and early 1990s, and now it has lost its market and significance. Its essence is a thin coating of a polymer of acrylic resin and emulsion covered on the newly laid stone (polishing board) surface, which is what we often call water wax or floor wax. Then, a high-speed, low-pressure polishing machine cooperates with fiber pads to rub on the stone surface to make the resin coating brighter. Due to the update of the product, special light wax, non-throw wax, etc. appeared later. This coating is similar to the varnish of the oil on the wooden floor.
3. The grinding block polishing process before the marble care crystal surface treatment is the process of physical and chemical interaction between the stone surface and chemicals. The surface layer and the bottom layer of the stone are completely integrated into a whole, and there is no separation layer.
4. The wax layer above the marble waxing and polishing is attached to the surface of the stone, and a layer of resin film does not have a chemical reaction with the stone itself. This wax film layer can be shoveled lightly with a blade, and the wax film can be cut off from the stone surface.
Representational distinction
1. The grinding and polishing of the marble grinding block is the prelude to the treatment of the crystal surface of the stone care. After the stone care and polishing, the luminosity is high, the definition is high, wear-resistant, resistant to stepping, and not easy to scratch. It is the true embodiment and value extension of the use function of the stone.
2. The luminosity of the stone after waxing and polishing is low, the luminosity is not clear, and it is very fuzzy, not wear-resistant, not water-resistant, easy to scratch, oxidize and turn yellow, which reduces the natural image of the stone.
The difference between extension and operation
1. After continuous nursing of the polished crystal layer and crystal layer of the stone grinding block (commonly known as crystal surface nursing), the pores are not completely closed, the stone can still breathe inside and outside, and the stone is not easy to be diseased. At the same time, it has a certain waterproof and anti-fouling effect.
2. After the marble is waxed and polished, the pores of the stone are completely closed, and the stone cannot breathe inside and outside, so the stone is prone to lesions.
3. The continuous care of the polished crystal layer and the crystal layer of the stone grinding block is easy to operate. No cleaning agent is needed to clean the ground. It can be polished and cared for at any time, and can be operated locally. There is no new contrast in the color of the stone surface.
4. After the marble is waxed and polished, after a period of time, the old wax layer needs to be removed, and the waxing water needs to be used. It is necessary to operate and construct in a large area at the same time, and local construction is not allowed. After local construction, there will be color difference on the surface.
realistic meaning
1. After the marble is polished by the diamond sanding block, the luminosity can reach 90-100 degrees, which restores the luminosity of the stone when it leaves the factory and realizes the reproduction of the stone value. When the crystal surface is treated and cared for, it can save time, labor, cost and wear resistance. After the marble is waxed and polished, its surface luminosity is reduced, blurred and unclear, which reduces the functional value of the stone and is not ornamental.
2. From the above difference between essence and appearance, it can be found that marble waxing and polishing must be eliminated and faded out of the market. Because the process principle and method of marble polishing and crystal surface care are more advanced, it can make marble more ornamental and prolong its service life.
Post time: Aug-11-2022